|
|
Product Code |
Pack Weight |
Yield |
 Click the pdf icon to download datasheets.
|
 |
100 Newton Grout Premium strength grout. Ultra high strength grout and support systems for crane rails, stanchion bases, machine bed plates, grout anchors and bridge bearing seats.
| Strength |
1day 84N/mm2
28day 105N/mm2 |
 |
| Thickness |
10mm - 100mm |
|
|
TG102 |
25kg
bag |
13ltrs |
|
|
|
A Grout Plasticising expanding admixture. Designed to be added to cement or sand/cement mixes on site.
| Strength - cement |
3day 26N/mm2
28day 44N/mm2 |
|
| Strength - sand/cement |
3day 21N/mm2
28day 41N/mm2 |
|
|
TG04 |
200g
tub |
N/A |
|
|
|
Cable Duct Grout Very high workability grout. Designed for post tensioned ducts, thin sections. Meets Clause 9 Concrete Society Technical Report 47.
| Strength |
1day 25N/mm2
28day 70N/mm2 |
|
| Thickness |
10mm down |
|
|
AG12 |
20kg
bag |
13.5ltrs |
|
|
|
CS Concrete High Strength concrete. Designed for thick sections under base plates, crane rails.
| Strength |
1day 25N/mm2
28day 65N/mm2 |
|
| Thickness |
100mm or greater |
|
|
TG08 |
25kg
bag |
12.3ltrs |
|
|
|
CS Concrete Fine High Strength concrete. As CS Concrete designed for narrower sections.
| Strength |
1day 40N/mm2
28day 68N/mm2 |
|
| Thickness |
50mm to 150mm |
|
|
TG09 |
25kg
bag |
12.5ltrs |
|
|
|
CS Grout High Strength flowable grout. Designed for base plates, crane rails, bridge bearings. Highways Specification Clause 2601.
| Strength |
1day 35N/mm2
28day 70N/mm2 |
|
| Thickness |
10mm to 100mm |
|
|
TG01 |
25kg
bag |
13.25ltrs |
|
|
|
CSW Grout Water resistant grout. Designed for grouting under wet conditions; tunnels, culvets, marine structures and sea defences.
| Strength |
1day 20N/mm2
28day 56N/mm2 |
|
| Thickness |
10mm to 100mm |
|
|
TG03 |
25kg
bag |
13.25ltrs |
|
|
|
GP Grout General purpose flowable grout. Designed for use where the highest mechanical properties, as given by CS Grout, are not required.
| Strength |
1day 21N/mm2
28day 57N/mm2 |
|
| Thickness |
10mm to 100mm |
|
|
TG100 |
25kg
bag |
13.25ltrs |
|
|
|
Hi-Flow SC Grout High flowing, shrinkage compensated grout. This free flowing cementitious grout has been designed for the grouting of ducts, voids and fine fissures.
| Strength |
1day 20N/mm2
28day 60N/mm2 |
|
| Thickness |
5mm to 30mm |
|
|
AG11 |
20kg
bag |
15ltrs |
|
|
|
Speedsure S Grout Rapid early strength grout. Designed for high early strength gain and rapid return to use on car parks, forecourts, loading bays, base plates etc.
| Strength |
1hr 12N/mm2
1day 40N/mm2
28day 70N/mm2 |
|
| Thickness |
10mm to 60mm |
|
|
AG03 |
25kg
bag |
12ltrs |
|
|
|
Thixopump S Grout Low density high volume void filler. Designed to seal rock and masonry fissures. Initial Set 7.5 hours. Final Set 9 hours.
| Strength |
1day 4N/mm2
28day 23N/mm2 |
|
| Thickness |
5mm to 50mm |
|
|
AG20 |
20kg
bag |
17.8ltrs |
|
|
|
TS Grout (Formerly TecGrout MSP) High workability grout. Designed for small thicknesses.
| Strength |
1day 28N/mm2
28day 62N/mm2 |
|
| Thickness |
10mm down |
|
|
TG33 |
25kg
bag |
15ltrs |
|
|
|
White CS Grout White high Strength flowable grout. Designed for grouting aesthetic white or pale shade concrete.
| Strength |
1day 20N/mm2
28day 67N/mm2 |
|
| Thickness |
10mm to 100mm |
|
|
TG15 |
25kg
bag |
13.25ltrs |
|
|
